The Stimsonite 980 surface mounted road stud is a durable prismatic reflector for roadway delineation to improve safety for all road users. It is widely used in all highway situations where road studs are required.
Features and Benefits
- Manufactured from impact-resistant polymers for durability
- Glass-faced to resist scratching & maintain retro-reflectivity
- Surpasses BS EN and ASTM requirements
- Finger grips to make laying easier
The application surface should be sound and clean, free from grease, oil, rust, scale, dirt, or any other soiling that might affect adhesion performance. Make sure the surface is completely flat, grind off any unevenness that will prevent the stud sitting completely flat on the carriageway.
Asphalt surfaces - we recommend the use of K2 stud adhesive or polymer-modified stud grout to bond studs to surface
Concrete - we recommend the use of K2 stud adhesive to bond studs, as stud grout is not effective on concrete surfaces; the surface will require priming with FP Line Primer, before application
Studs can be bonded using K2 adhesive or bituminous stud grout. Follow relevant instructions to prepare the adhesive.
Dispense sufficient adhesive to enable the stud to be placed evenly leaving a thin bead around the edge of the stud.
The road can be opened to traffic as soon as the adhesive has set.
See relevant Tech Data Sheets for cure times of K2 stud adhesive or stud grout