An encapsulated natural aggregate resin repair kit. Perfectly meets current demands for sustainable drainage (SUDS) whilst ensuring a stunning surface. For use in resin bound surface where an area needs to be reinstated or repaired. Matched to suit and naturally blends in with existing surface.
Approx Coverage: 20mm Depth 0.5msqFeatures and Benefits:
- Fast installation
- Easy and simple to use
- Smart and clean finish
- Permeable Surface - (SUDS) compliant
- Convenience - everything you need all in one kit
Application Instructions:Empty aggregate mix where required and gently screed to correct height with the trowel. Ensure even trowel action to avoid leaving trowel marks in the finished surface. White Spirit can be used sparingly on tools to keep them clean whilst installing PatchBound. Firm pressure must be applied when trowelling to ensure all aggregate is fully bound. You can also have the option of lightly scattering Crushed Glass across the surface before the resin has completely cured to give the surface an improved anti-slip finish. Clean all tools used with thinners once completed.
Mixing Instructions: Remove lid of Part A resin bucket and empty Part B into Part A. Stir both parts together until fully mixed. Pour mixed resin into aggregate and mix using a Collomix Drill with helical whisk. Ensure all aggregate is evenly covered in resin and you have a consistent mix. Consistent finish will always require consistent mixing.
SURFACE PREPARATION: Remove any standing water and compact loose particles prior to application. PatchBound is designed to be installed at a minimum depth of 15mm. The sub-base should be a stable and permanent substrate, such as concrete or asphalt.
Pot life: 15 mins @ 15°C
Working time: 30 mins @ 15°C
Cure time: 6 hours @ 15°C
Curing times will be affected by changes in temperature. Allow at least 12 hours before any light vehicular traffic. If a more rapid cure is required, please enquire about our resin accelerator.