A single pack, water-based protective varnish sealant which is fast drying and easily applied. ProtectLine is designed to be used as a sealer or varnish for Spectrum lining systems. It is fully sprayable using airless spray machines; it can also be applied by hand. As it is waterbased, it is compatible with many linemarking products.Features & Benefits:
- Preserves the life span of lines
- Eliminates chalking and yellowing
- Maximises colour retention
The application surface should be sound and clean, free from grease, oil, rust, scale, dirt, or any other soiling that might affect adhesion or performance. In any case, but especially in the case of overcoating existing line markings, it is further recommended that test areas be coated to ensure good adhesion and/or compatibility with the substrate/previously applied coatings.
Stir thoroughly before use.
Thinning: This product is supplied ready to use and need not be thinned. If thinning is required, clean water may be used, up to 20% by volume.
We recommend the use of airless spray equipment. Roller or brushes can be also be used if spray equipment is not available.
Touch dry: 5 minutes @ 15oC
Walk on time: 10 minutes @ 15oC
Traffic time: 20 minutes @ 15oC
Full cure: 60 minutes @ 15oC
Recoat: 1-2 hours @ 15oC