Solvent based single pack polyurethane (PU) varnish. It is easily applied and compatible with many line marking products. Ideal for overcoating new lines and markings to help reduce soiling and extend life; can also be used to overseal existing lines.
Typically used internally on power floated concrete floors in distribution centres, logistics hubs, factories and warehouses. The use of Tredonit will extend the line life and help cleanliness where there are regular cleaning regimes and high levels of MHE activity.Features and Benefits:
- Quick and easy application, using roller or spray machine
- Tough and durable
- Can be used with many linemarking products
The application surface should be sound and clean, free from grease, oil, rust, scale, dirt, or any other soiling that might affect adhesion or performance.
It is further recommended that test areas be coated to ensure good adhesion and compatibility with the substrate & previously applied coatings.
We recommend the use of airless spray equipment. Roller or brushes can be also be used if spray equipment is not available.
Tredonit should be applied in an even coat and should not be applied too thickly, as this will inhibit he cure process. If a higher gloss or greater protection is required, apply 2 or more coats, allowing sufficient cure time between coats.
Do not apply when the air or surface temperature is below 5°C or less than 3°C above dew point, or if this is likely to occur during the curing period.
Do not apply when there is rain, mist, fog, or snow imminent; when humidity is high or the surface is wet with condensation or likely to be during the drying period.
Touch dry: 1 hour @ 15⁰C.
Walk on time: 4 hours @15oC
Traffic time: 16 hours @ 15⁰C.
Full cure: 24 hours @ 15⁰C.
Recoat: 16 hours @ 15⁰C.