ClearSeal X260 is a single pack and solvent based acrylic varnish. It is a very fast drying product to allow rapid return to traffic, whilst providing a gloss finish which is durable and long-lasting. It is also fully sprayable using airless spray equipment for fast application; it can also be applied by hand. ClearSeal can be used on a wide range of Spectrum lining and coating systems.
FEATURES AND BENEFITS
- Resists soiling
- Easy to clean
- Improves visibility, safety and productivity
- Durable and long-lasting
- Fast drying
SURFACE PREPARATION:The application surface should be sound and clean, free from grease, oil, rust, scale, dirt, or any other soiling that might affect adhesion or performance. In any case, but especially in the case of overcoating existing line markings, it is further recommended that test areas be coated to ensure good adhesion and/or compatibility with the substrate/previously applied coatings
Mixing instructions: Stir thoroughly.
Thinning: This product is supplied ready to use and need not be thinned. If thinning is required, Type II Thinner may be used, up to 20% by volume.
We recommend the use of airless spray equipment. Roller or brushes can be also be used if spray equipment is not available.
Do not apply when: either the air or surface temperature is below 5°C; when there is mist, fog, or snow; when rain is imminent; when humidity is high or when the surface is wet with condensation; either during the application or likely during the drying period.
Coverage rate: 250g/m2
Coats required: One is generally sufficient but a second coat can be laid for extra protection.