Solvent-free cold spray plastic for road marking based on reactive acrylic resin. Used for all forms of permanent surface markings on both asphalt and concrete surfaces for markings on highways, roads and other areas in the public and private sectors, as well as maintenance markings Type I and II. Airless spray application in a closed mixing system.
Features and Benefits
• Fast mechanical application
• Rapid trafficability
• Stable quality for two to three years (depending on traffic
volume and thickness of coat)
• Weather resistant"
"The cold spray plastic can be applied with air atomising or Airless-System.
Please note: Never mix solvent into cold spray plastic! Stir up the liquid hardener well. The material shall be mixed 98:2 with liquid hardener on an appropriate application machine. Afterwards the mixture can be sprayed directly on the surface. When interrupting the marking, clean the mixing system and all tools thoroughly. The air temperature must not fall below 5°C, the relative air humidity must not exceed 75%. The surface temperature has to be at least 3°C above the dew point but must not pass over 40°C."